研究室主要致力于燃料电池、锂离子电池和液流电池相关领域的关键原材料、核心部件、系统集成、过程监控的应用基础研究与工程开发。重点研发能量密度高、使用寿命长、环境友好的新型电源（能源）技术。研究室目前主要开展质子交换膜燃料电池、直接甲醇燃料电池、中低温固体氧化物燃料电池、锂离子动力电池、锂离子电池正极材料、锂硫聚合物电池和超级电容器等领域的研究。

主要研究方向：

高比容量、高安全性、长寿命、低成本锂离子电池关键技术研发及产业化制备技术研发

新型质子交换膜的制备研究（阻醇膜、高温膜、碱性膜）

低铂质子交换膜燃料电池电催化剂的制备，

燃料电池膜电极的结构设计及制备过程研究，燃料电池堆和发电系统的设计与系统集成

高效、智能化直接甲醇燃料电池发电系统集成技术

电解水制氢/制氧技术，太阳能/氢能供电系统的集成技术

中低温固体氧化物燃料电池的基础研究及电堆技术

锂硫聚合物电池及其关键材料研发

燃料电池和锂离子电池数学模型的建立与计算机模拟

新型液流电池材料研究

科技部"863"计划课：

新结构自增湿质子交换膜燃料电池技术研究,科技部"863"计划课题(2008AA05Z104),2008-2010.

基于新型聚苯并咪唑的交联型有机－无机复合耐高温质子交换膜制备技术，科技部863计划课题(2008AA03Z205),2008-2010.

1kW国产材料质子交换膜燃料电池的研制与开发,科技部"863"计划课题(2006AA03Z223),2006-2008.

智能化高效直接甲醇燃料电池电源系统的研制，科技部"863"计划课题(2006AA05Z138),2006-2008.

科技部"973"计划课题：

纳米材料与技术在智能电网储能用二次电池中应用基础研究，科技部"973"计划课题，2011CB935902, 2011.1-2015.12

电动汽车用低成本、高密度蓄电（氢）体系基础科学问题研究第五课题---低成本蓄电（氢）材料制备过程工程理论, 科技部"973"计划课题，2007CB209705, 2007.7-2012.7

高密度车载储氢新体系及其安全性预测理论研究，科技部"973"计划课题(2007CB209706)，2007-2012.

国家自然科学基金：

导电高分子/纳米金复合催化剂的可控制备及机理研究,国家自然科学基金(50873050),2008-2011.

DMFC用交联型有机无机复合质子交换膜分子设计与制备研究，国家自然科学基金(50703021),2008-2010.

新型金属磷硫和硅硫化物电池材料的合成、结构及电化学性能研究, 国家自然科学基金（50772057）, 2008.1-2010.12

低温固体氧化物燃料电池阴极电催化剂研究,国家自然科学基金(20576063),2005-2008.

新型非氟质子交换膜材料的分子设计、合成与结构研究,国家自然科学基金(50573041),2006-2008.

国际合作：

Mechanism investigation of sulfur composite for lithium storage，国际合作, 2008～2009

Analytical Model of Lithium-Ion Batteries for Power Management，国际合作, 2008～2009

Si-based alloy anode composite materials for Li-ion batteries, 国际合作, 2008～2009

Alloy anode composite materials for Li-ion batteries, 国际合作, 2008～2009

Phase diagram of layered LiNixCo1-x-yMnyO2, 国际合作, 2007～2009

太阳能-氢能系统,壳牌氢能-清华大学国际合作项目(0630000333),2007-2009.

Study on gas generation of the inter-reaction between the electrolyte and the cathode materials of LiNi1- x -yCoxMnyO2 at high temperature, 国际合作, 2007～2008

Modification of hard carbon anode for Li-Ion Battery, 国际合作, 2005～2007

Study on Ion Transport Properties of Electrolytes for Lithium Ion Batteries, 国际合作, 2006～2007

Gel Electrolyte for Li-Ion Battery, 国际合作, 2005～2006

其它科技项目：

10kW级天然气重整-质子交换膜燃料电池示范电站,北京市科委重大科技项目(D0406001040391),2006-2009.

煤矿井下本安型大容量不间断备用电源开发，横向项目，2008.5~2009.12

锂离子电池正极材料磷酸铁锂的产业化及相关动力电池，横向合作, 2006-

动力型锂离子电池用高密度高导电性球形磷酸铁锂制备技术研究, 高等学校博士学科点专项科研基金（20070003056）, 2008.1-2010.12

集成储氢单元的新型燃料电池研究，2008年教育部博士点基金-新教师基金（200800031037），2009.1-2011.12.

近10年来，本研究室发表科研论文350余篇，被SCI收录284篇。多数SCI收录论文发表在Journal of Power Sources、Electrochemical Communications、Journal of Electrochemical Society、Carbon、International Journal of Hydrogen Energy等电化学、电源等国际知名期刊上。部分论文列表如下：

1. THERMAL ANALYSIS OF SULFURIZATION OF POLYACRYLONITRILE WITH ELEMENTAL SULFUR, He XM, Wang L, Pu WH, et al., JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY Volume: 94 Issue: 1 Pages: 151-155, OCT 2008

2. A new process of preparing composite microstructure anode for lithium ion batteries, Zhao HP, Jiang CY, He XM, et al., Conference Information: Meeting of the International Battery Material Association, NOV 16-20, 2007 Shenzhen, PEOPLES R CHINA, JOURNAL OF POWER SOURCES Volume: 184 Issue: 2 Special Issue: Sp. Iss. SI Pages: 532-537, OCT 1 2008

3. Synthesis and characterization of Sn-doped LiMn2O4 cathode materials for rechargeable Li-ion batteries, Guo SH, Zhang SC, He XM, et al., JOURNAL OF THE ELECTROCHEMICAL SOCIETY Volume: 155 Issue: 10 Pages: A760-A763, 2008

4. A Si-SnSb/pyrolytic PAN composite anode for lithium-ion batteries, Zhao JS, Wang L, He XM, et al., ELECTROCHIMICA ACTA Volume: 53 Issue: 24 Pages: 7048-7053, OCT 15 2008

5. Synthesis of star macromolecules for solid polymer electrolytes, Li N, Wang L, He XM, et al., IONICS Volume: 14 Issue: 5 Pages: 463-467, SEP 2008

6. Synthesis of Si-SnSb/pyrolytic polyacrylonitrile composite anode for reversible lithium storage, Zhao JS, He XM, Wang L, et al., JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS Volume: 11 Issue: 3 Pages: 187-192, JUL 2008

7. Composite cathode Bi1.14Sr0.43O2.14-Ag for intermediate-temperature solid oxide fuel cells, Gao Z, Zhang P, Gao RF, et al., JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION Volume: 23 Issue: 3 Pages: 350-353, JUN 2008

8. Development of compact miniature annular centrifugal contactor for hot cell placement, He XM, CHEMICAL ENGINEERING COMMUNICATIONS Volume: 195 Issue: 10 Pages: 1227-1239, 2008

9. Modification of natural graphite for lithium ion batteries, Zhao HP, Ren JG, He XM, et al. SOLID STATE SCIENCES Volume: 10 Issue: 5 Pages: 612-617, MAY 2008

10. Research progresses on vanadium-based polyanion-type compounds electrode materials for lithium-ion batteries, Yang G, Ying JR, Gao J, et al., RARE METAL MATERIALS AND ENGINEERING Volume: 37 Issue: 5 Pages: 936-940, MAY 2008

11. Effects of cocatalyst and calcination temperature on photocatalytic hydrogen evolution over BaTi4O9 powder synthesized by the polymerized complex method, Sun W, Zhang SQ, Wang C, et al., CATALYSIS LETTERS Volume: 123 Issue: 3-4 Pages: 282-288, JUL 2008

12. Charge/discharge characteristics of sulfur composite electrode at different temperature and current density in rechargeable lithium batteries, He XM, Pu WH, Ren JU, et al., IONICS Volume: 14 Issue: 4 Pages: 335-337, JUL 2008

13. Structure and properties of BaO-Al2O3-B2O3 glass sealants, Zeng FR, Gao RF, Mao ZQ, et al., CHINESE JOURNAL OF INORGANIC CHEMISTRY Volume: 24 Issue: 5 Pages: 808-812, MAY 10 2008

14. Composite cathode La0.15Bi0.85O1.5-Ag for intermediate-temperature solid oxide fuel cells, Gao Z, Mao ZQ, Huang HB, et al., MATERIALS CHEMISTRY AND PHYSICS Volume: 108 Issue: 2-3 Pages: 290-295, APR 15 2008 15. Studies on the enhanced photocatalytic hydrogen evolution over Pt/PEG-modified TiO2 photocatalysts, Sun W, Zhang SQ, Liu ZX, et al., INTERNATIONAL JOURNAL OF HYDROGEN ENERGY Volume: 33 Issue: 4 Pages: 1112-1117, FEB 2008

16. FeS2 cathode materials for lithium batteries, Feng X, He XM, Pu WH, et al., PROGRESS IN CHEMISTRY Volume: 20 Issue: 2-3 Pages: 396-404, MAR 2008

17. A novel composite anode for LIB prepared via template-like-directed electrodepositing Cu-Sn alloy process, Zhao HP, Jiang CY, He XM, et al., IONICS Volume: 14 Issue: 2 Pages: 113-120, APR 2008

18. Research of AC impedance of dynamic behavior of direct methanol fuel cell, Li JC, Xie XF, Guo JW, et al., CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE Volume: 29 Issue: 3 Pages: 564-568, MAR 10 2008 19. Effect of current collector corrosion made from printed circuit board (PCB) on the degradation of self-breathing direct methanol fuel cell stack, Guo JW, Xie XF, Wang JH, et al., ELECTROCHIMICA ACTA Volume: 53 Issue: 7 Pages: 3056-3064, FEB 25 2008

20. Determination of lithium-ion transference numbers in LiPF6-PC solutions based on electrochemical polarization and NMR measurements, Zhao JS, Wang L, He XM, et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY Volume: 155 Issue: 4 Pages: A292-A296, 2008

21. Preparation of micro-porous membrane electrodes and their application in preparing anodes of rechargeable lithium batteries, Zhao HP, Jiang CY, He XM, et al., JOURNAL OF MEMBRANE SCIENCE Volume: 310 Issue: 1-2 Pages: 1-6, MAR 5 2008

22. Preparation of P(AN-MMA) gel electrolyte for Li-ion batteries, Pu WH, He XM, Wang L, et al., IONICS Volume: 14 Issue: 1 Pages: 27-31, FEB 2008

23. Membranes from sulfonated block copolymer for use in proton exchange membrane fuel cells, Feng SG, Xie XF, Shang YM, et al., PROGRESS IN CHEMISTRY Volume: 20 Issue: 1 Pages: 117-125, JAN 2008

24. Performance of fuel cells with proton-conducting ceria-based composite electrolyte and nickel-based electrodes, Huang JB, Mao ZQ, Liu ZX, et al., JOURNAL OF POWER SOURCES Volume: 175 Issue: 1 Pages: 238-243, JAN 3 2008

25. Preparation of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent Li-ion batteries, Li JG, Zhang Q, He XM, Conference Information: International Conference of Nonferrous Materials (ICNFM), NOV 25-30, 2007 Changsha, PEOPLES R CHINA, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA Volume: 17 Special Issue: Part B Sp. Iss. 1 Pages: S897-S901 Part: Part B Sp. Iss. 1, NOV 2007

26. Electrochemical performance of SrF2-coated LiMn2O4 cathode material for Li-ion batteries, Li JG, He XM, Zhao RS, Conference Information: International Conference of Nonferrous Materials (ICNFM), NOV 25-30, 2007 Changsha, PEOPLES R CHINA, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA Volume: 17 Issue: 6 Pages: 1324-13

27, DEC 2007 27. High performance low temperature ceramic fuel cell with zinc doped ceria-carbonates composite electrolyte, Huang JB, Yang LZ, Mao ZQ, Conference Information: 4th China International Conference on High-Performance Ceramics (CICC-4), OCT 23-26, 2005 Chengdu, PEOPLES R CHINA, High-Performance Ceramics IV, Pts 1-3 Book Series: KEY ENGINEERING MATERIALS Volume: 336-338 Pages: 413-416 Part: Part 1-3, 2007

28. Electrochemical performance of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries, Li JG, He XM, Zha RS, et al., Conference Information: 4th China International Conference on High-Performance Ceramics (CICC-4), OCT 23-26, 2005 Chengdu, PEOPLES R CHINA, High-Performance Ceramics IV, Pts 1-3 Book Series: KEY ENGINEERING MATERIALS Volume: 336-338 Pages: 459-462 Part: Part 1-3, 2007

29. Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries, Pu WH, He XM, Zhang GY, et al., Conference Information: 4th China International Conference on High-Performance Ceramics (CICC-4), OCT 23-26, 2005 Chengdu, PEOPLES R CHINA, High-Performance Ceramics IV, Pts 1-3 Book Series: KEY ENGINEERING MATERIALS Volume: 336-338 Pages: 477-480 Part: Part 1-3, 2007

30. Al2O3 coating of spherical LiNi0.8Co0.2O2 for Li-ion batteries, He XM, Pu W, Zhao FH, et al., Conference Information: 4th China International Conference on High-Performance Ceramics (CICC-4), OCT 23-26, 2005 Chengdu, PEOPLES R CHINA, High-Performance Ceramics IV, Pts 1-3 Book Series: KEY ENGINEERING MATERIALS Volume: 336-338 Pages: 517-520 Part: Part 1-3, 2007

31. Low temperature electrolyte for Li-lon batteries, He XM, Pu WH, Han JL, et al., Conference Information: 4th China International Conference on High-Performance Ceramics (CICC-4), OCT 23-26, 2005 Chengdu, PEOPLES R CHINA, High-Performance Ceramics IV, Pts 1-3 Book Series: KEY ENGINEERING MATERIALS Volume: 336-338 Pages: 530-532 Part: Part 1-3, 2007

32. Poly(acrylonitrile-methyl methacrylate) based microporous gel electrolyte for Li-ion battery, Pu WH, He XM, Wang L, et al., Conference Information: 4th China International Conference on High-Performance Ceramics (CICC-4), OCT 23-26, 2005 Chengdu, PEOPLES R CHINA, High-Performance Ceramics IV, Pts 1-3 Book Series: KEY ENGINEERING MATERIALS Volume: 336-338 Pages: 533-536 Part: Part 1-3, 2007

33. Movel-SiO2-doped proton exchange membrane for self-humifying fuel cell, Wang C, Wan NF, Mao ZQ, et al., Conference Information: 4th China International Conference on High-Performance Ceramics (CICC-4), OCT 23-26, 2005 Chengdu, PEOPLES R CHINA, High-Performance Ceramics IV, Pts 1-3 Book Series: KEY ENGINEERING MATERIALS Volume: 336-338 Pages: 537-540 Part: Part 1-3, 2007

34. Nano sulfiur composite for Li/S polymer secondary batteries, He XM, Pu WH, Li JJ, et al., Conference Information: 4th China International Conference on High-Performance Ceramics (CICC-4), OCT 23-26, 2005 Chengdu, PEOPLES R CHINA, High-Performance Ceramics IV, Pts 1-3 Book Series: KEY ENGINEERING MATERIALS Volume: 336-338 Pages: 541-544 Part: Part 1-3, 2007

35. Hydrothermal synthesis of FeS2 for lithium batteries, Feng X, He XM, Pu WH, et al., IONICS Volume: 13 Issue: 5 Pages: 375-377, OCT 2007

36. Development of novel low-temperature SOFCs with co-ionic conducting SDC-carbonate composite electrolytes, Huang HB, Mao ZQ, Liu ZX, et al., ELECTROCHEMISTRY COMMUNICATIONS Volume: 9 Issue: 10 Pages: 2601-2605, OCT 2007

37. Si, Si/Cu core in carbon shell composite as anode material in lithium-ion batteries (vol 178, pg 115, 2007), Wang K, He XM, Wang L, et al., SOLID STATE IONICS Volume: 178 Issue: 23-24 Pages: 1419-1419, AUG 2007

38. Transport properties of lithium-ion of electrolyte used in lithium-ion batteries, Zhao JS, Wang L, He XM, et al., PROGRESS IN CHEMISTRY Volume: 19 Issue: 10 Pages: 1467-1474, OCT 2007

39. Advanced structures in electrodepo sited tin base anodes for lithium ion batteries, Zhao HP, Jiang CY, He XM, et al., ELECTROCHIMICA ACTA Volume: 52 Issue: 28 Pages: 7820-7826, NOV 1 2007

40. Monitoring reactive degree of biodiesel catalyzed by calcium oxide via gas chromatography, Liu XH, Wu ZB, Zhang P, et al., ACTA CHIMICA SINICA Volume: 65 Issue: 18 Pages: 2025-2028, SEP 28 2007

41. Research progress in silicon based anode materials for lithium-ion batteries, Zhao JS, He XM, Wan CR, et al., RARE METAL MATERIALS AND ENGINEERING Volume: 36 Issue: 8 Pages: 1490-1494, AUG 2007

42. Electrodeposited tin-based alloy with composite structure used as anode materials for lithium ion batteries, Zhao HP, Jiang CY, He XM, et al., ACTA METALLURGICA SINICA Volume:43 Issue: 7 Pages: 775-779, JUL 2007

43. Charge/discharge characteristics of sulfur composite cathode materials in rechargeable lithium batteries, He XM, Pu WH, Ren JG, et al., ELECTROCHIMICA ACTA Volume: 52 Issue: 25 Pages: 7372-7376, SEP 2007

44. Sulfur composite cathode materials: Comparative characterization of polyacrylonitrile precursor, Pu WH, He XM, Wang L, et al., IONICS Volume: 13 Issue: 4 Pages: 273-276, AUG 2007

45. Sintering of Ce0.8Sm0.2O1.9, Gao RF, Mao ZQ, JOURNAL OF RARE EARTHS Volume: 25 Issue: 3 Pages: 364-367, JUN 2007

46. Synthesis of spherical nano tin encapsulated pyrolytic polyacrylonitrile composite anode material for Li-ion batteries, He XM, Pu WH, Wang L, et al., SOLID STATE IONICS Volume: 178 Issue: 11-12 Pages: 833-836, MAY 15 2007

47. Anatase TiO2 films with 2.2 eV band gap prepared by micro-arc oxidation, Wan L, Li JF, Feng JY, et al., MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY Volume: 139 Issue: 2-3 Pages: 216-220, MAY 15 2007

48. Purification and carbon-film-coating of natural graphite as anode materials for Li-ion batteries, Zhao HP, Ren JG, He XM, et al., ELECTROCHIMICA ACTA Volume: 52 Issue: 19 Pages: 6006-6011, MAY 25 2007

49. Ball milling of graphite/tin composite anode materials in a liquid, medium, Wang K, He XM, Ren JG, et al., JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS Volume: 10 Issue: 3 Pages: 167-170, JUL 2007

50. Synthesis of nanosized Si composite anode material for Li-ion batteries, He XM, Pu WH, Ren JG, et al., IONICS Volume: 13 Issue: 1 Pages: 51-54, MAR 2007

51. Study on a novel manufacturing process of membrane electrode assemblies for solid polymer electrolyte water electrolysis, Zhang YJ, Wang C, Wan NF, et al., ELECTROCHEMISTRY COMMUNICATIONS Volume: 9 Issue: 4 Pages: 667-670, APR 2007

52. High-density spherical Li4Ti5O12/C anode material with good rate capability for lithium ion batteries, Gao J, Ying JR, Jiang CY, et al., JOURNAL OF POWER SOURCES Volume: 166 Issue: 1 Pages: 255-259, MAR 30 2007 53. Addition of NH4HCO3 as pore-former in membrane electrode assembly for PEMFC, Zhao JS, He XM, Wang L, et al., INTERNATIONAL JOURNAL OF HYDROGEN ENERGY Volume: 32 Issue: 3 Pages: 380-384, MAR 2007

54. Deposited RuO2-IrO2/Pt electrocatalyst for the regenerative fuel cell, Zhang YJ, Wang C, Wan NF, et al., INTERNATIONAL JOURNAL OF HYDROGEN ENERGY Volume: 32 Issue: 3 Pages: 400-404, MAR 2007

55. Hard carbon/lithium composite anode materials for Li-ion batteries, Sun H, He XM, Ren JG, et al., ELECTROCHIMICA ACTA Volume: 52 Issue: 13 Pages: 4312-4316, MAR 20 2007

56. Titanium substrate based micro-PEMFC operating under ambient conditions, Wan NF, Wang C, Mao ZQ, ELECTROCHEMISTRY COMMUNICATIONS Volume: 9 Issue: 3 Pages: 511-516, MAR 2007

57. Synthesis of nano Sb-encapsulated pyrolytic polyacrylonitrile composite for anode material in lithium secondary batteries, He XM, Pu WH, Wang L, et al., ELECTROCHIMICA ACTA Volume: 52 Issue: 11 Pages: 3651-3653, MAR 1 2007

58. Preparation and characterization of LiFePO4 from NH4FePO4 center dot H2O under different microwave heating conditions, Li W, Ying JR, Wan CR, et al., JOURNAL OF SOLID STATE ELECTROCHEMISTRY Volume: 11 Issue: 6 Pages: 799-803, JUN 2007

59. Coating of spherical Ni(OH)(2) cathode materials for Ni-MH batteries at elevated temperature, He XM, Jiang CY, Li W, et al., RARE METAL MATERIALS AND ENGINEERING Volume: 36 Issue: 2 Pages: 291-295, FEB 2007

60. Improved optical response and photocatalysis for N-doped titanium oxide (TiO2) films prepared by oxidation of TiN, Wan L, Li JF, Feng JY, et al. APPLIED SURFACE SCIENCE Volume: 253 Issue: 10 Pages: 4764-4767, MAR 15 2007 Times Cited: 5

61. Preparation of a microporous polymer electrolyte based on poly(vinyl chloride)/poly(acrylonitrile-butyl acrylate) blend for Li-ion batteries, Tian Z, Pu WH, He XM, et al. ELECTROCHIMICA ACTA Volume: 52 Issue: 9 Pages: 3199-3206, FEB 15 2007 Times Cited: 2

62. Si, Si/Cu core in carbon shell composite as anode material in lithium-ion batteries, Wang K, He XM, Wang L, et al.SOLID STATE IONICS Volume: 178 Issue: 1-2 Pages: 115-118, JAN 31 2007, Times Cited: 7

63. Nanometer copper-tin alloy anode material for lithium-ion batteries, Ren JG, He XM, Wang L, et al., ELECTROCHIMICA ACTA Volume: 52 Issue: 7 Pages: 2447-2452, FEB 1 2007

64. Preparation of nanometer-sized SnO2 by the fusion method, Zhang YJ, Wang C, Mao ZQ, et al., MATERIALS LETTERS Volume: 61 Issue: 4-5 Pages: 1205-1209, FEB 2007

65. Synthesis and electrochemical performance of Li4Ti5O12 as anode material for lithium secondary batteries, Gao J, Jiang CY, Ying JR, et al., JOURNAL OF INORGANIC MATERIALS Volume: 22 Issue: 1 Pages: 176-180, JAN 2007

66. Reclaim/recycle of Pt/C catalysts for PEMFC, Zhao JS, He XM, Tian JH, et al.m ENERGY CONVERSION AND MANAGEMENT Volume: 48 Issue: 2 Pages: 450-453, FEB 2007

67. Performance of an integrated composite membrane electrode assembly in DMFC, Wan NF, Mao ZQ, Wang C, et al., JOURNAL OF POWER SOURCES Volume: 163 Issue: 2 Pages: 725-730, JAN 1 2007

68. Power characteristics and fluid transfer in 40 W direct methanol fuel cell stack, Liu Y, Xie XF, Shang YM, et al., JOURNAL OF POWER SOURCES Volume: 164 Issue: 1 Pages: 322-327, JAN 10 2007,

69. Preparation and characterization of LiFePO4 made from NH4FePO4 center dot H2O, Li W, Ying JR, Wan CR, et al., RARE METAL MATERIALS AND ENGINEERING Volume: 35 Issue: 12 Pages: 1959-1962, DEC 2006,

70. High temperature cycleability of spherical spinel LiMn2O4 with Al-doped surface, He XM, Pu WH, Jiang CY, et al., RARE METAL MATERIALS AND ENGINEERING Volume: 35 Issue: 12 Pages: 1987-1990, DEC 2006

71. Chemical reduction of nano-scale Cu2Sb powders as anode materials for Li-ion batteries, Ren JG, He XM, Pu WH, et al., Conference Information: 56th Annual ISE Meeting, SEP 25-30, 2005 Busan, SOUTH KOREA, ELECTROCHIMICA ACTA Volume: 52 Issue: 4 Pages: 1538-1541, DEC 1 2006

72. LiBOB-based electrolyte for lithium batteries, Pu WH, He XM, Wang L, et al., PROGRESS IN CHEMISTRY Volume: 18 Issue: 12 Pages: 1703-1709, DEC 2006

73. Tin-based alloy anodes for lithium ion batteries, Zhao HP, He XM, Jiang CY, et al., PROGRESS IN CHEMISTRY Volume: 18 Issue: 12 Pages: 1710-1719, DEC 2006

74. Transport phenomena and numerical simulation related to water in direct methanol fuel cell, Qi L, Xie XF, Xu JM, et al., PROGRESS IN CHEMISTRY Volume: 18 Issue: 12 Pages: 1725-1734, DEC 2006

75. Synthesis of PAN/SnCl2 composite as Li-ion battery anode material, He XM, Ren JG, Wang L, et al., IONICS Volume: 12 Issue: 4-5 Pages: 323-326, DEC 2006

76. Preparation and characterization of Li3V2(PO4)(3) via microwave carbothermal reduction method, Ying JR, Jiang CY, Tang CP, et al., RARE METAL MATERIALS AND ENGINEERING Volume: 35 Issue: 11 Pages: 1792-1796, NOV 2006

77. Coke coating of natural graphite for Li-ion batteries, Li JJ, He XM, Jiang CY, et al., JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS Volume: 9 Issue: 1 Pages: 21-25, JAN 2006

78. Preparation of Sn2Sb alloy encapsulated carbon microsphere anode materials for Li-ion batteries by carbothermal reduction of the oxides, Wang K, He XM, Ren JG, et al., ELECTROCHIMICA ACTA Volume: 52 Issue: 3 Pages: 1221-1225, NOV 12 2006

79. Oxygen evolution improvement of Ni(OH)(2) by Ca-3(PO4)(2) coating at elevated temperature, Li W, He XM, Ren JG, et al., JOURNAL OF ELECTROANALYTICAL CHEMISTRY Volume: 597 Issue: 2 Pages: 127-129, DEC 1 2006

80. Preparation of poly(acrylonitrile-butyl acrylate) gel electrolyte for lithium-ion batteries, Tian Z, He XM, Pu WH, et al., ELECTROCHIMICA ACTA Volume: 52 Issue: 2 Pages: 688-693, OCT 25 2006

81. Effects of annealing treatment and pH on preparation of citrate-stabilized PtRu/C catalyst, Xu YQ, Xie XF, Guo JW, et al., JOURNAL OF POWER SOURCES Volume: 162 Issue: 1 Pages: 132-140, NOV 8 2006

82. Synthesis and characterization of novel sulfonated naphthalenic polyimides as proton conductive membrane for DMFC applications, Shang YM, Xie XF, Jin H, et al. EUROPEAN POLYMER JOURNAL Volume: 42 Issue: 11 Pages: 2987-2993, NOV 2006

83. Numerical simulation of a mini PEMFC stack, Liu ZX, Mao ZQ, Wang C, et al. JOURNAL OF POWER SOURCES Volume: 160 Issue: 2 Special Issue: Sp. Iss. SI Pages: 1111-1121, OCT 6 2006

84. Hard carbon/Li2.6Co0.4N composite anode materials for Li-ion batteries, Sun H, He XM, Li JJ, et al., SOLID STATE IONICS Volume: 177 Issue: 15-16 Pages: 1331-1334, JUN 15 2006

85. TiO2 coating of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries, Li JG, Fan MS, He XM, et al., IONICS Volume: 12 Issue: 3 Pages: 215-218, SEP 2006

86. Optimized LiFePO4-polyacene cathode material for lithium-ion batteries, Xie HM, Wang RS, Ying JR, et al., ADVANCED MATERIALS Volume: 18 Issue: 19 Pages: 2609-+, OCT 4 2006

87. Preparation of nano-TiO2 composite membrane and its application in fuel cell, Wang C, Xu P, Mao ZQ, et al., RARE METAL MATERIALS AND ENGINEERING Volume: 35 Issue: 9 Pages: 1432-1436, SEP 2006

88. Ytterbium coating of spherical Ni(OH)(2) cathode materials for Ni-MH batteries at elevated temperature, He XM, Wang L, Li W, et al.,JOURNAL OF POWER SOURCES Volume: 158 Issue: 2 Special Issue: Sp. Iss. SI Pages: 1480-1483, AUG 25 2006

89. Preparation and characterization of Li3V2(PO4)(3) cathode material for lithium ion batteries, Ying JR, Gao J, Jiang CY, et al.,JOURNAL OF INORGANIC MATERIALS Volume: 21 Issue: 5 Pages: 1097-1102, SEP 2006

90. Synthesis and surface modification of tin-copper alloy anode for lithium ion battery by electrodeposition process, Ren JG, Pu WH, He XM, et al., RARE METAL MATERIALS AND ENGINEERING Volume: 35 Pages: 359-364 Supplement: Suppl. 2, AUG 2006

91. Progress in porous phosphonates, Wu ZB, Tian P, Liu ZM, et al.,PROGRESS IN CHEMISTRY Volume: 18 Issue: 9 Pages: 1092-1100, SEP 2006

92. Preparation of Cu6Sn5-encapsulated carbon microsphere anode materials for Li-ion batteries by carbothermal reduction of oxides, Wang K, He XM, Wang L, et al.,JOURNAL OF THE ELECTROCHEMICAL SOCIETY Volume: 153 Issue: 10 Pages: A1859-A1862, 2006

93. Capacity fading of LiCr0.1Mn1.9O4/MPCF cells at elevated temperature, Li JG, He XM, Fan MS, et al., IONICS Volume: 12 Issue: 2 Pages: 153-157, JUL 2006

94. Preparation of P(AN-MMA) microporous membrane for Li-ion batteries by phase inversion, Pu WH, He XM, Wang L, et al., JOURNAL OF MEMBRANE SCIENCE Volume: 280 Issue: 1-2 Pages: 6-9, SEP 1 2006

95. Preparation and characterization of LiFePO4 from a novel precursor of NH4FePO4 center dot H2O, Li W, Gao J, Ying JR, et al., JOURNAL OF THE ELECTROCHEMICAL SOCIETY Volume: 153 Issue: 9 Pages: F194-F198, 2006

96. Preparation and property of nanometer Cu-Sn alloy anode material for lithium-ion batteries, Ren JG, He XM, Jiang CY, et al., ACTA METALLURGICA SINICA Volume: 42 Issue: 7 Pages: 727-732, JUL 11 2006

97. Stannum doping of layered LiNi3/8Co2/8Mn3/8O2 cathode materials with high rate capability for Li-ion batteries, Li JG, He XM, Zhao RS, et al., JOURNAL OF POWER SOURCES Volume: 158 Issue: 1 Pages: 524-528, JUL 14 2006

98. Preparation and characterization of high-density spherical Li0.97Cr0.01FePO4/C cathode material for lithium ion batteries, Ying JR, Lei M, Jiang CY, et al., JOURNAL OF POWER SOURCES Volume: 158 Issue: 1 Pages: 543-549, JUL 14 2006

99. Behavior of PEMFC in starvation, Liu ZX, Yang LZ, Mao ZQ, et al., JOURNAL OF POWER SOURCES Volume: 157 Issue: 1 Pages: 166-176, JUN 19 2006

100. Ca-3(PO4)(2) coating of spherical Ni(OH)(2) cathode materials for Ni-MH batteries at elevated temperature, He XM, Ren JG, Li W, et al., ELECTROCHIMICA ACTA Volume: 51 Issue: 21 Pages: 4533-4536, JUN 1 2005

101. Conductance calculation of LiPF6 in organic solutions based on mean spherical approximation theory He XM, Pu WH, Han JL, et al. CHEMICAL PHYSICS Volume: 324 Issue: 2-3 Pages: 767-770, MAY 31 2006

102. Preparation of novel naphthalenic sulfonated polyimide proton conductive membrane, Shang YM, Xie XF, Liu Y, et al., CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE Volume: 27 Issue: 6 Pages: 1153-1156, JUN 2006

103. Electrochemical activities of yttrium doped spinel LiMn2O4, He XM, Pu WH, Cai Y, et al., IONICS Volume: 12 Issue: 1 Pages: 73-75, MAY 2006

104. Synthesis of spherical LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries, Li JG, He XM, Fan MS, et al., IONICS Volume: 12 Issue: 1 Pages: 77-80, MAY 2006

105. Preparation of biodiesel catalyzed by solid super base of calcium oxide and its refining process, Zhu HP, Wu ZB, Chen YX, et al., CHINESE JOURNAL OF CATALYSIS Volume: 27 Issue: 5 Pages: 391-396, MAY 2006

106. Synthesis and characterization of novel fluorinated polyimides derived from 4-phenyl-2,6-bis[4-(4 '-amino-2 '-trifluoromethyl-phenoxy)phenyl]pyridine and dianhydrides Shang YM, Fan L, Yang SY, et al. EUROPEAN POLYMER JOURNAL Volume: 42 Issue: 5 Pages: 981-989, MAY 2006

107. Research and application of regenerative fuel cells, Zhang YJ, Mao ZQ, Xie XF, et al., PROGRESS IN CHEMISTRY Volume: 18 Issue: 5 Pages: 635-640, MAY 2006

108. A high-performance ceramic fuel cell with samarium doped ceria-carbonate composite electrolyte at low temperatures, Huang JB, Yang LZ, Gao RF, et al., ELECTROCHEMISTRY COMMUNICATIONS Volume: 8 Issue: 5 Pages: 785-789, MAY 2006

109. Preparation of Sn/C microsphere composite anode for lithium-ion batteries via carbothermal reduction, Wang K, He XM, Ren JG, et al., ELECTROCHEMICAL AND SOLID STATE LETTERS Volume: 9 Issue: 7 Pages: A320-A323, 2006

110. Preparation and characterization of high-density spherical Li4Ti5O12 anode material for lithium secondary batteries, Gao J, Jiang CY, Ying JR, et al., JOURNAL OF POWER SOURCES Volume: 155 Issue: 2 Pages: 364-367, APR 21 2006

111. Operation conditions optimization of hydrogen production by propane autothermal reforming for PEMFC application, Liu ZX, Mao ZQ, Xu JM, et al., CHINESE JOURNAL OF CHEMICAL ENGINEERING Volume: 14 Issue: 2 Pages: 259-265, APR 2006

112. Research and development of preparing spherical cathode materials for lithium ion batteries by controlled crystallization method, Ying JR, Gao J, Jiang CY, et al., JOURNAL OF INORGANIC MATERIALS Volume: 21 Issue: 2 Pages: 291-297, MAR 2006

113. TiO2 photocatalyst high specific surface area: Preparation and hydrogen evolution performance, Wang H, Wang XM, Sun W, et al., CHINESE JOURNAL OF INORGANIC CHEMISTRY Volume: 22 Issue: 3 Pages: 464-468, MAR 2006

114. Electrochemical properties of intermediate-temperature SOFCs based on proton conducting Sm-doped BaCeO3 electrolyte thin film, Peng RR, Wu Y, Yang LZ, et al., SOLID STATE IONICS Volume: 177 Issue: 3-4 Pages: 389-393, JAN 31 2006

115. Preparation of PVDF-HFP microporous membrane for Li-ion batteries by phase inversion, Pu WH, He XM, Wang L, et al., JOURNAL OF MEMBRANE SCIENCE Volume: 272 Issue: 1-2 Pages: 11-14, MAR 15 2006

116. Co/Yb hydroxide coating of spherical Ni(OH)(2) cathode materials for Ni-MH batteries at elevated temperatures, He XM, Jiang CY, Li W, et al., JOURNAL OF THE ELECTROCHEMICAL SOCIETY Volume: 153 Issue: 3 Pages: A566-A569, 2006

117. Current research status of small fuel cells and its application analysis, Wang C, Mao ZQ, Chen RH, et al., PROGRESS IN CHEMISTRY Volume: 18 Issue: 1 Pages: 30-35, JAN 2006

118. Molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory, Pu WH, He XM, Lu JF, et al., JOURNAL OF CHEMICAL PHYSICS Volume: 123 Issue: 23 Article Number: 231105, DEC 15 2005

119. In situ composite of nano SiO2-P(VDF-HFP) porous polymer electrolytes for Li-ion batteries, He XM, Shi Q, Zhou X, et al., ELECTROCHIMICA ACTA Volume: 51 Issue: 6 Pages: 1069-1075, NOV 25 2005

120. Track polypropylene membrane based on irradiation with fragments from fission of uranium, He XM, Sun ZG, Wan CR, RADIATION MEASUREMENTS Volume: 41 Issue: 1 Pages: 112-113, JAN 2006

121. Manufacture of anti-bogus label by track-etching technique, He XM, Wan CR, RADIATION MEASUREMENTS Volume: 41 Issue: 1 Pages: 120-122, JAN 2006

专著：

1. 毛宗强编著，氢能——21世纪的绿色能源，化学工业出版社，北京，2005年1月

2. 毛宗强等编著，燃料电池，化学工业出版社，北京，2005年4月

3. 毛宗强，甑英俊等译，太阳-氢能，拯救地球的动力，中国人民公安大学出版社，北京，2002年6月

4. 谢晓峰，范星河译，燃料电池技术，化学工业出版社，北京，2004年

奖励：

1. 2004年，“锂离子电池正极材料控制结晶---固相反应新工艺”在第五届中国国际发明展览会荣获银奖

2. 2006年，毛宗强教授荣获国际氢能学会（IAHE）颁发的“儒勒•凡尔纳”奖

3. 2010年，“空冷、自增湿式质子交换膜燃料电池发电机”在2010年第十九届全国发明展览会上获得金奖