教育背景

博士 202106 西北工业大学 固体力学（英国伦敦玛丽女王大学 联合培养）

硕士 201703 西北工业大学 航空工程

学士 201406 西北工业大学 飞行器设计与工程

工作履历

202307-至今 清华大学核研院 助理研究员

202107-202307 清华大学航天航空学院 博士后 助理研究员

学术兼职

202411-至今 中国核学会 会员

研究领域

主要从事高温气冷堆堆内构件设计与分析、反应堆结构力学与损伤力学研究。研究领域包括核石墨与复合材料性能、极端载荷下材料力学行为与损伤失效、核电厂与主设备地震安全分析、散体动力学等。

研究概况

202501-202712 核石墨结构冲击损伤失效机理与模型研究 国家自然科学基金青年科学基金项目

学术成果

[1] Zhou Junjie, Chen Huihan, Feng Huawei, et al. A fast approach for predicting stress intensity factors in tortuous cracks under mixed-mode loading[J]. Engineering Fracture Mechanics, 2024, 296: 109834. (IF: 5.4, 1区Top)

[2] Zhou Junjie*, Wu Tianhao, Sun Libin, et al. Study of Fatigue Properties of Graphite Materials Under Four-Point Bending[C]. ASME 2024 Pressure Vessels & Piping Conference, 2024.

[3] Xi Ze*, Wang Xiangang, Luo Xiaowei, Zhou Junjie, Song Lei. Preliminary Study on Endoscopic Ultrasound System for In-Service Inspection of Helical Tube Once-Through Steam Generator[C]. 2024 31st International Conference on Nuclear Engineering, 2024.

[4] Zhang Haowei, Li Mengze, Zhou Junjie, et al. Applicability evaluation of damage evolution models in simulating repeated low-velocity impact behavior of composite laminates[J]. Journal of Reinforced Plastics and Composites, 2024.

[5] Zhou Junjie, Chen Yanxi, Feng Huawei, et al. Could effective fracture toughness of polycrystalline aggregates exceed inner grain fracture toughness by adjusting toughness of grain boundary? [J]. Engineering Fracture Mechanics, 2023, 282: 109170. (IF: 5.4, 1区Top)

[6] Nan Zihao, Fang, Yaopeng, Yang Pengfei, Meng Shun, Zhou Junjie, Liu Bin*. Strong-anisotropy-induced instability and discussion on kink band under complex loads[J]. Extreme Mechanics Letters, 2023, 62: 102043.

[7] Lei Peidong, Meng Shun, Wu Jian, Liu Zhanli, Imtiaz Haroon, Feng Huawei, Zhou Junjie, Liu Bin*. Is the Jaumann Stress Rate Applicable? — Discussions on Choosing Proper Rate Expressions of a Finite Deformation Constitutive Model[J]. International Journal of Applied Mechanics, 2023, 15(10).

[8] Zhou Junjie*, Liu Bin, Wang Shengnan. Finite element analysis on impact response and damage mechanism of composite laminates under single and repeated low-velocity impact[J]. Aerospace Science and Technology, 2022, 129: 107810. (IF: 5.6, 1区Top, 他引39次)

[9] Zhou Junjie*, Wang Shengnan*. Changes in dynamic mechanical behavior of carbon fiber reinforced polymer laminates under multiple low energy impacts[J]. Journal of Composite Materials, 2022, 56(8): 1221-1232.

[10] Feng Huawei, Imtiaz Haroon, Yang Pengfei, Wang Yongqing, Zhou Junjie, Liu Bin*. Universal measures of strength anisotropy based on local failure[J]. Composite Structures, 2022: 116536.

[11] Jia Senqing, Wang Fusheng*, Zhou Junjie, et al.. Study on the mechanical performances of carbon fiber/epoxy composite material subjected to dynamical compression and high temperature loads[J]. Composite Structures, 2021, 258: 113421.

[12] 周俊杰, 王生楠*. 复合材料层合板低速冲击的渐进损伤模型[J]. 西北工业大学学报, 2021, 39 (1): 37-45

[13] Zhou Junjie*, Wen Pihua, Wang Shengnan*. Numerical investigation on the repeated low-velocity impact behavior of composite laminates[J]. Composites Part B: Engineering, 2020, 185: 107771. (IF: 13.1, 1区Top, 他引91次)

[14] Zhou Junjie*, Wen Pihua, Wang Shengnan*. Finite element analysis of a modified progressive damage model for composite laminates under low-velocity impact[J]. Composite Structures, 2019, 225: 111113. (IF: 6.3, 1区Top, 他引99次)

[15] 周俊杰, 王生楠*. 飞机机翼壁板紧固孔细节原始疲劳质量评估[J]. 西北工业大学学报, 2018, 36 (1): 91-95

[16] 鲁龙坤, 王生楠*, 周俊杰等. 基于启裂载荷的临界裂纹尖端张开角确定[J]. 西北工业大学学报, 2017, 35(1): 13-19