教育背景

博士 200802 曼彻斯特大学 工程物理

研究生 200407 清华大学 核研院

学士 200107 清华大学 土木工程系

工作履历

2021年12月至今，清华大学核能与新能源技术研究院，研究员

2012年12月至2021年12月，清华大学核能与新能源技术研究院，副研究员

2008年2月至2012年12月，清华大学核能与新能源技术研究院，助理研究员

研究领域

核级设备的分析与评价、蒸汽发生器流致振动、高温部件的试验与数值分析方法、高温气冷堆石墨构件失效的试验、分析和评价方法研究等

学术成果

[1] High-temperature tensile strength and anisotropic evaluation of fine-grained graphite based on disc compression. Junjie Zhou,  Tianhao Wu,  Yuanyuan Ma, Huijie Yan, Libin Sun, Li Shi. Journal Of Nuclear Materials. Volume615, 2025

[2] Numerical analysis of flow-induced deflection of curved nuclear reactor fuel plates under high velocity flows. Junwen Zheng, Xiaoxin Wang, Li Shi, Wenli Guo, Qin Zhou. Journal Of Nuclear Science And Technology. Volume61 Issue9, Page1177-1191, 2024

[3] Creep rupture mechanisms and life prediction of IN617 for VHTR applications. Yue Wang&, Li Shi, Chaoyu Han, Kejian Li, Zhipeng Cai, Haitao Wang*. Materials Science and Engineering. Volume 812, 2021

[4] Installation of the graphite internals in HTR-PM. Dongqing Tian&, Li Shi, Libin Sun*, Zhengming Zhang, Zhigang Zhang, Zhensheng Zhang. Nuclear Engineering and Design. Volume 363, 2020

[5] An Integral Numerical Analysis of Impact of a Commercial Aircraft on Nuclear Containment. Xiaoxin Wang , Qin Zhou , Li Shi*, Haitao Wang , Xiaotian Li. Science and Technology of Nuclear Installations. Volume 2019.

[6] Experimental study to estimate the surface wear of nuclear graphite in HTR-PM. Xiujie He, Li Shi, Haiyan Li, Jie Tan, Baoliang Zhang, Alex Fok, Xinxin Wu, Libin Sun. Annals of Nuclear Energy. Volume 116, 2018

[7] Graphite Component Testing on the Load Capacity of the Dowel-Brick Structure in HTR-PM. Li Shi, Libin Sun, Zonggang Wang, Yuqin Hu, zhensheng Zhang.  proceedings of the 20th international conference on nuclear engineering and the ASME 2012 power conference – 2012, P157-163

[8] A two-stage shape optimization process for cavity preparation. Li Shi, ASL Fok, Dental materials, 2009, volume 24, issue: 11, 1444-1453

[9] Analysis of crack propagation in nuclear graphite using three-point bending of sandwiched specimens. Li Shi, Haiyan Li, Zhengming Zou, ASL Fok, et al., Journal of Nuclear Materials, 2008, (372): 141-151